Exposing some bugs on LeCroy’s new WaveStation 3162 and the HDO4024 oscilloscope.
Please cite this article as:Bug 1 (WS3162): When modulation is applied to a channel, the amplitude drops below the set value.
Bug 2 (WS3162): Phase control dysfunctional on both channels when modulation is applied to either one channel.
Bug 3 (HDO4024): Spectrum calculation locks up and slows the spectrum update down significantly if “Average” or “Max Hold” mode has been selected previously to switching into “normal” mode. FW: Version: 7.3.0.5 & 7.4.0.5
UPDATE (06/16/2014): Just 15 minutes after I published the video, Dan Payne (Director of Distribution, Teledyne LeCroy) writes this: “Thanks Sebastian – I’ll have the applications team look at it immediately – The video makes it a lot easier to see the application.”
Westerhold, S. (2014), "LeCroy WS3162 and HDO4024 Bugs". Baltic Lab High Frequency Projects Blog. ISSN (Online): 2751-8140., https://baltic-lab.com/2014/06/lecroy-ws3162-and-hdo4024-bugs/, (accessed: April 26, 2024).
Funding:
If you liked this content, please consider contributing. Any help is greatly appreciated.