The so-called “infinite impedance detector” is a circuit that was commonly used in the old days of vacuum tubes. Since vacuum tubes can be somewhat considered to be heated JFETs, it is evident that such a circuit can also be built using a more modern, silicon-based approach. This article covers my first experiments with a […]
Continue reading…
Search Results for: 455 Khz Filter
Source for toroids, magnet wire and IF cans
This article is probably going to be the shortest and most straight to the point article I will ever write. While I was looking for different kinds of toroidal ferrite / iron cores, I came across the online shop of amateur radio operator Dieter Gentzow, W8DIZ [1]. Dieter has a huge selection of toroids and […]
Continue reading…
How it works: Quadrature detector
Many integrated FM quadrature demodulation circuits, such as the MC3361 or MC3362, have a defined LC tank circuit that creates a specific phase shift of 90 degrees at the center frequency of the demodulator. Let’s take a closer in depth look at how they work. A quadrature demodulator for FM signals consists out of two […]
Continue reading…
Exclusive OR (XOR) gate based phase detector
A phase detector generates a voltage proportional to the difference in phase between two signals. They are used in Phase-Locked-Loop (PLL) designs and PM / FM demodulator circuits. But how do they work? I promised in a previous blog article titled ‘No Tune NE602 / NE612 FM Demodulator’ that I would explain how a quadrature […]
Continue reading…
No Tune NE602 / NE612 FM Demodulator
FM demodulators have and always will be desired circuits. Many circuit designs use old and obsolete parts or appear to be too complicated for beginners. This design shows a very simple FM demodulator, a quadrature demodulator to be precise, for a 455 KHz IF using only a handful of parts and an NE602. The NE602 […]
Continue reading…